logo
1.EMPANELMENT OF SYSTEM INTEGRATOR AT NATIONAL OR CIRCLE LEVEL | 2.EoI for EMPANELMENT of National/ Circle/ Partner Promotion Franchisees For Cloud based PABX/UC Service

Tender

S.No.NIT No.SUBJECTDate of IssueOPENING DATEISSUED FROMISSUED TILLISSUED SECTIONFile Of NIT.File Of TenderCorregendum File
1 05/SDE(E)/BSNL/ESD/RGH/22-23 ( Re-Call) Replacement of out lived HPSV type fittings by 25 W LED fittings for compound lighting at Telephone Exchange Compound Attamuda & Kharsia under SSA Raigarh 03/02/2023 13/02/2023
03:30 PM 		03/02/2023 10/02/2023 Electrical Division



2 16/EE(E)/BSNL-BSP/2022-23 Providing & fixing of separate electrical meter in different CSC under BA Bilaspur 02/02/2023 15/02/2023
03:30 PM 		02/02/2023 13/02/2023 Electrical Division



3 NIQ. N0. 11/ 2022-23/CD/RYP Dated 27/01/2023 Making arrangement to install equipments for 200 PRIs in Room no 202 by partioion WORK in CTX Building Fafadih Raipur 27/01/2023 04/02/2023
03:30 PM 		27/01/2023 27/01/2023 Civil Division



4 NIQ. N0. 11/ 2022-23/CD/RYP Dated 27/01/2023 SCHEDULE OF QUANTITIES Name of the work : Making arrangement to install equipments for 200 PRIs in Room no 202 by partioion WORK in CTX Building Fafadih Raipur I.No. Description of Item Quantity Rate (Rs) Unit Amount(Rs) Sub-Head : Dismantling and Demolishing 1 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. a In cement mortar 2.00 Cum One Cubic Metre 2 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 6.00 Cum One Cubic Metre Sub-Head : Wood and P.V.C. Work 3 Providing and fixing Stainless Steel tower bolts with necessary screws etc. complete : a 250x10mm 1.00 No. Each Sub-Head : Aluminium Work 4 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : a For fixed portion i Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 80.00 Kg One Kilogram b For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). i Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 15.00 Kg One Kilogram 5 Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. a Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. 20.00 Sqm One Square Metre 6 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): a With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 8.00 Sqm One Square Metre 7 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. a Anodized (AC 15 ) aluminium tubular handle bar 2.00 Nos. Each 8 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 1.00 No. Each Sub-Head : Roofing 9 Providing and fixing plain multipurpose cement board (High pressure steam cured) with suitable screws for cement particle board in Duct etc. complete (frame work to be paid separately). a 12 mm thick Cement bonded wood particle board as per IS:14276 12.00 Sqm One Square Metre Sub-Head : Finishing 10 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement: 6 fine sand). 3.00 Sqm One Square Metre 11 Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note :- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. 30.00 Sqm One Square Metre Total Making arrangement to install equipments for 200 PRIs in Room no 202 by partioion WORK in CTX Building Fafadih Raipur 27/01/2023 04/02/2023
03:30 PM 		27/01/2023 27/01/2023 Civil Division



5 No. GEM/2023/B/3036191 Dated 31-01-2023 E-TENDER FOR UPKEEP & ASSOCIATED WORK OF TELECOM SERVICES AT RAIPUR BA-ZONE-2 31/01/2023 14/02/2023
06:30 PM 		31/01/2023 14/02/2023 Switching Planning



6 45 /EEE/BSNL/RYP/2022-23(2nd Call) Supplying, Installation , Testing & Commissioning of 137 Nos 1.5TR, 5-star Inverter type Split AC units for different BSNL Telephone Exchange Sites under BSNL Electrical Division Raipur Chhattisgarh. 31/01/2023 16/02/2023
05:37 PM 		31/01/2023 16/02/2023 Electrical Division



7 GEM/2023/B/3004570 Dated 31-01-2023 E-TENDER FOR UPKEEP & ASSOCIATED WORK OF TELECOM SERVICES AT RAIPUR BA-ZONE-1 31/01/2023 14/02/2023
05:30 PM 		31/01/2023 14/01/2023 Switching Planning



8 45/EE(E)/BSNL/RYP/2022-23 Shifting and Special repairs of DG sets , Pumps & miscellaneous EI at different TE Bldgs. under ESD - I Raipur 30/01/2023 09/02/2023
03:30 PM 		30/01/2023 31/01/2023 Electrical Division



9 CGMT/CG/EB/SECL MPLS Tender/2022-23/ dated: 28-01-2023 E-BID FOR IMPLEMENTATION OF MPLS_VPN WAN PROJECT FOR SECL BILASPUR, DISTRIBUTED IN ITS VARIOUS LOCATIONS COMPRISING OF NETWORK EQUIPMENTS, INSTALLATION, CONFIGURATION, TESTING, COMMISSIONING, SETTING UP OF CENTRALIZED NOC , ITS MAINTENANCE & SERVICES UNDER SCOPE FOR FIVE YEARS ON OPEX MODEL 28/01/2023 22/02/2023
03:00 PM 		28/01/2023 21/02/2023 Enterprise Business



10 SM-10/CGMT/MKTG/PRINTING & SUPPLY of Marketing Material/E-Tender/128 E-tender for Printing and Supply of Marketing Materials 28/01/2023 18/02/2023
03:00 PM 		28/01/2023 17/02/2023 Marketing



1 2 3 4 5 6 7 8 9 10 ...